Tubular & Quartz Heaters
Modular Quartz Heater Assemblies
 |
HR Radiant Heater assemblies are Incoloy 840 sheltered tubular heaters mounted in an aluminum housing with a reflector to provide a uniform band of radiant heat to the surface. Ideal for applications where high belocity air is not practical, such as conveyorized drying, thermoforming, ink drying, dry tunnels, shrink fitting, thermography, resin curing and water drying.
- Broad Beam - for industrial use as a surface heating medium
- Break, slash, shockproof metal sheath heating element - extruded aluminum housing
- Infrared can save as much as 85% of time as compared to convection heating
- Absorbes easily by all colors, clear glass, plastics, transparent solids and liquids
- FAR Infrared - Long invisible radiant wave length (2.5/3 microns).
- Typical work range to 500°F, practical maximum to 900°.
- For outdoor or hazardous locations specify M2 terminal enclosure.
Design & Installation
- Normally used perpendicular to direction of work
- May be ganged together for continuous heat bank
- Up to 300K F, thermal insulation is not normally used. Above 300° F, insulation will improve economy.
- Reflector normally located 12" from work. Distance can be varied due to specific requirements.
- Snap-on nickel-plated protective grill available.
- Each unit has at least two sliding steel clamps for mounting that can be positioned at any point along the length of the housing.
|
