QUARTZ HEATERS ARE DESIGNED TO BE USED IN A HORIZONTAL POSITION ONLY

FEATURES Compact and versatile Quick heat and cool response Functional Design Clean heat energy Lower power consumption High operating temperatures Made to customer specifications CEM RADIANT QUARTZ HEATERS are specifically designed for applications that require infrared radiant heating. QUARTZ HEATERS basic design consists of helically wound resistance coil housed by a pure vitreous silica fused quartz tube. The heating coil is specially designed to providde long life at rated voltage. The quartz tubing is terminated with specially designed ceramic insulating cap that allow the quartz tubing to breath. The ceramic caps are securely fastened to the quartz tube with high temperature cement, providing excellent support to the power connecting termination. CEM RADIANT QUARTZ HEATERS are one of the most efficient sources of radiant energy. QUARTZ HEATERS can deliver near and far infrared wave length, capable of generating full heat output capacity in 40 to 50 seconds and cool down in less than 15 seconds. They offer excellent life characteristics whether operated continuously or intermittently.

For most efficient heating and loger operating life, quartz heating applications should be rated around 30 to 40 watts per square inch. Quartz heating elements do not give off an objectionable glare because of a very low emission in the visible spectrum. Optimum design provides a clear red color on the translucent quartz tube when operating at full voltage, providing an infrared wave length at energy peak of 2.5 to 3.0 microns. The wave length is almost completely absorbed by the process, and considered best for most industrial applications. RADIANT QUARTZ HEATERS are primarily manufactured to customer specifications. QUARTZ HEATER SPECIFICATIONS DIMENSIONAL Ceramic End Caps QUARTZ TUBE O.D.A - B 3/8"    5/16"  5/8" 1/2"    1/2"  7/8" 5/8"    1/2"  7/8" DIAMETER: MAXIMUM LENGTH: MINIMUM LENGTH: LENGTH TOLERANCE: SCREW TERMINAL: TERMINATION: 3/8" - 1/2" - 5/8" 72" 12" Minimum ± 1/8" up to 12" long ± 2% over 12" long 10-32 threads type T1 ELECTRICAL RESISTANCE TOLERANCE: WATTAGE TOLERANCE: MAXIMUM VOLTS: MAXIMUM AMPERAGE: MAXIMUM WATT DENSITY: Nema Standard + 10% -5% Nema Standard + 5% -10% 480 Volts when applicable 20 Volts when applicable 40 Watts PER/IN2

Straight Out Leads 10" flexible lead wire externally spliced standard. If longer leads required - SPECIFY Ceramic Caps With Leads This termination provides a 10-32 screw terminals insulated with ceramic terminal covers. Screws are prewired with 10" flexible lead wire. If longer leads required - SPECIFY. Tabs With Slotted Holes ½" wide x ¾" long, with a 9/32" x 3/8" slot. Alternate mounting method.