| CERAMIC INSULATED BAND HEATERS | |
| Clamping Variations | ||
 Built-In Bracket - Standard The Built-In Bracket is the basic design most often specified by OEM's and processors. The standard screw used a ¼"-20. It is available with all types of insulation, construction styles, or termination variations. The Built-In Bracket can also be supplied with a spring loaded screw. The spring loaded clamp aids in absorbing thermal expansion.
Limitations |
 Latch and Trunion The spring loaded Latch and Trunion clamping system is ideal for bands over 12" in diameter to absorb thermal expansion and facilitate installation on large bands. The Latch and Trunion clamping system is available with all types of insulation, construction styles, or termination variations.
Limitations |
 Bent-Up Flange (Ears) The Bent-Up Flange (Ears) is available with all types of insulation, construction styles, or termination variations.
Limitations |
| Construction Style | |
 Shell Overlap Shell Overlap The Shell Overlap design is the preferred method of providing a themocouple mounting hole in a ceramic band heater. It is available with all types of insulation, construction styles, clamping or termination variations.
Min. ID: 3" (76.2 mm) |
 Inner Liner The stainless steel Inner Liner is specially used to retard contamination from entering into the ceramic blocks. It will decrease heat transfer slightly. It can be supplied solid or perforated to improve heat transfer. The Inner Liner is available with all types of insulation, construction styles, clamping or termination variations.
Min. ID 2" (50.8 mm) |