| CERAMIC INSULATED BAND HEATERS |
|
Screw Terminals |
 |
|
 Type T3 Screw Terminals Type T3 Screw Terminals are available with all types of insulation, construction styles, or clamping variations. It is considered to be standard on most band heaters unless otherwise specified. For use with leads, crimp terminals, or bus bars. Includes high temperature washers and nuts. Limitations Min. ID: 2" (50.8 mm) Min. Width: 2" (50.8 mm) |
 Type T2 Screw Terminals Type T2 Screw Terminals are available with all types of insulation, construction styles, or clamping variations. It is considered to be standard on most band heaters under 2" in width unless otherwise specified. Includes high temperature washers and nuts. Limitations Min. ID: 2" (50.8 mm) Min. Width: 1" (25.4 mm) |
 Type L1 Straight Lead Wires Type L1 Straight Lead Wires are available with all types of insulation, construction styles, or clamping variations. They are used primarily on small diameter bands where clearance is limited. If applicable, screw terminals should always be specified due to the high heat generated by ceramic bands. The standard flexible leads are 10" long. If longer Leads are required, specify when ordering. Limitations Min. ID: 2" (50.8 mm) Min. Width: 1" (25.4 mm) |
| Abrasive Resistant Lead Terminations |
||
|
Low Profile Box  Type W1 Straight Wire Braid Lead Straight Wire Braid Leads are available with all types of insulation, construction styles, or clamping variations. Wire braid leads offer sharp bending not possible with armor cable. If applicable, screw terminals should always be specified due to the high beat generated by ceramic bands. The standard leads are 10" of wire braid over 11" of flexible leads. If longer leads are required, specify when ordering. Limitations Min. ID: 2" (50.8 mm) Min Width 1" (25.4 mm) Max Volts 240VAC; Max Amps: 10 |
 Type R1 Straight Armor Cable Straight Armor Cable is available with all types of insulation, construction styles, or clamping variations. Armor cable provides far superior protection to lead wires where abrasion is a constant problem. If applicable, screw terminals should always be specified due to the high heat generated by ceramic bands. The standard leads are 10" of armor cable over 12" of flexible leads. If longer leads or electrical connections are required, specify when ordering. Type R1A—Galvanized Stl. Armor Cable Type R1B—Stainless 3d. Armor Cable Limitations Min. ID: 2" (50.8 mm) Min. Width: 1" (25.4 mm) Max Volts: 240VAC; Max Amps: 10 |
Standard Box Right-Angle Armor Cable Right-Angle Armor Cable is available with all types of insulation, construction styles, or clamping variations. It is used where space is limited and abrasion is a constant problem. If applicable, screw terminals should always be specified due to the high heat generated by ceramic bands. The standard leads are 10" of armor cable over l2" of flexible leads. If longer leads or electrical connectors are required, specify when ordering. Type R2A—Galvanized Stl. Armor Cable Type R2B—Stainless Stl. Armor Cable Limitations Min. ID: 2" 50 8 mm) Min. Width: 1" (25.4 mm) Max Volts: 240VAC; Max Amps: 10 |